Sv400 Drill Cutting Transfer System

The SV400 Drill Cutting Transfer System was primarily designed for the offshore oil and gas drilling industry. The pump is capable of recovering up to 40m3/hour of 2.6sg cuttings under vacuum, and delivering the same via 100mm pipe some several hundred metres. The SV400 Drill Cutting Transfer System can transfer mud, sludge and slurry along with cuttings directly from the shale shakers to skips or bulk tanks without the need to re-slurrify.

Compact and with a relatively small footprint, when configured correctly the SV400 is capable of operating in line with the high ROI's of todays drilling.

The SV400 Drill Cutting Transfer System features:

• 100% air powered operation
• Intrinsically safe
• No internal workings
• Can be a fixed or mobile system
• Generates 25"hg using 600cfm@85psi+
• One man operation
• Optional top load/gravity feed
• 400, 600 and 750 cfm jet packs available

• Shaker to skip cuttings transfer
• Drill mud transfer
• Pit and sump cleaning
• Hazardous waste recovery
• Oil sludge residue transfer
• Vacuum cleaning of tank bottoms

• Height 158cm (5'3")
• Width 100cm (3'3")
• Length 186cm (6'2")
• Weight 1000kg (2'200lbs)
• Air consumption 600cfm@85psi+
• Suction inlet 100mm (4")
• Discharge outlet 100mm (4")
• Handles solids to 70mm (3")